讯海轴承/SKF/圆柱滚子轴承/NUP 221 ECML/C3

SKF NUP 221 ECML/C3 圆柱滚子轴承 105×190×36 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 105×190×36 mm

关键尺寸

105内径 d / mm
190外径 D / mm
36宽度 B / mm

资料下载

SKF NUP 221 ECML/C3 技术参数

尺寸
孔径105 mm
外径190 mm
宽度36 mm
性能
基本额定动荷300 kN
基本额定静负荷315 kN
参考转速3800 r/min
极限转速4300 r/min
SKF 性能等级SKF Explorer
属性
轴承部件整套轴承
轴向位移能力无
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架机削铜
法兰数量,外圈2
挡边数量,内圈1
活套法兰内圈活套法兰
径向游隙C3
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹17.4 kg CO<sub>2</sub>e

产品说明

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one integral flange and one loose flange ring on the inner ring, NUP design bearings can locate the shaft axially in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

同尺寸其他型号

以下型号与 SKF NUP 221 ECML/C3 的主要尺寸相同(d 105 × D 190 × B 36 mm),可用于同尺寸替代选型。

同系列相近型号